TCB Fully automatic extrusion blow moulding machine(double station) 60D
Main technical parameter:
| Max.Product Volume |
(L) |
2 |
| Dry Cycle |
(PC/h) |
700*2 |
| Screw Diameter |
(mm) |
60 |
| Screw L/D ratio |
(L/D) |
24-30 |
| Screw drive power |
(KW) |
15-18.5 |
| Srew heating capacity |
(KW) |
10.8-12 |
| Output of HDPE |
(kg/h) |
60-68 |
| Oil pump drive power |
(KW) |
5.5 |
| Clamping force |
(KN) |
35 |
| Platen distance |
(mm) |
138-368 |
| Max.Die diameter |
(mm) |
90 |
| Central distance of bi-die |
(mm) |
130-150 |
| Max.Die diameter (Bi-die) |
(mm) |
80 |
| Central distance of three-die |
(mm) |
80-110 |
| Max.Die diameter (Three-die) |
(mm) |
40 |
| Central distance of four-die |
(mm) |
60-85 |
| Max.Die diameter (four-die) |
(mm) |
25 |
| The Average Consumption |
(kw/h) |
16.5 |
| Blowing pressure |
(Mpa) |
0.6 |
| Air volume |
(M3/MIN) |
0.4 |
| Cooling water pressure |
(Mpa) |
0.3 |
| Water consumption |
(L/MIN) |
60 |
| Size of machine |
(L*M*H)/m |
3.0*2.15*2.6 |
| Weight of machine |
(TON) |
6.5 |
Clamping system: Fixed two-way translation module structure
Extruding system: hard gear box + Delta inverter
Die system: Storage die
Hydraulic system: Yuken hydraulic valve / oil pump + electric hydraulic proportion control
Circuit system: Mitsubishi PLC + man - and - computer interface + Temperature - controlled module
The above parameters are for your reference, subject to change without notice for further improvement
|
English 
中文版
