Main technical parameter:
| Max.Product Volume |
(L) |
12 |
6 |
| Dry Cycle |
(PC/h) |
1000 |
800 |
| Screw Diameter |
(mm) |
75 |
90 |
| Screw L/D ratio |
(L/D) |
24-30 |
25 |
| Screw drive power |
(KW) |
18.5-30 |
45 |
| Srew heating capacity |
(KW) |
13-16 |
24 |
| Output of HDPE |
(kg/h) |
90-105 |
140 |
| Oil pump drive power |
(KW) |
7.5-11 |
11-18.5 |
| Clamping force |
(KN) |
105-150 |
150-220 |
| Platen distance |
(mm) |
200-550 |
300-750 |
| Max.Die diameter |
(mm) |
230 |
300 |
| Die heat capacity |
(kw) |
6.5-8.0 |
13 |
| The Average Consumption |
(kw/h) |
25 |
32 |
| Blowing pressure |
(Mpa) |
0.8 |
0.8 |
| Air volume |
(M3/MIN) |
0.8 |
1.1 |
| Cooling water pressure |
(Mpa) |
0.3 |
0.3 |
| Water consumption |
(L/MIN) |
70 |
100 |
| Size of machine |
(L*M*H)/m |
4.2*2.2*3.6 |
5.2*3.5*3.8 |
| Weight of machine |
(TON) |
8.1 |
12.5 |
Clamping system: Fixed two-way translation module structure
Extruding system: hard gear box + Delta inverter
Die system: Storage die
Hydraulic system: Yuken hydraulic valve / oil pump + electric hydraulic proportion control
Circuit system: Mitsubishi PLC + man - and - computer interface + Temperature - controlled module
The above parameters are for your reference, subject to change without notice for further improvement
|
English 
中文版
